Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 45

Managed Switch CLI Manual, Release 8.0 show port description This command displays the port description for every port. Format Mode show port description Privileged EXEC Term Interface Description Definition Valid slot and port number separated by forward slashes Shows the port description configured via the "description" command show port status This command displays the Protocol-Based VLAN information for either the entire system, or for the indicated group. Format Mode show port status { | all} Privileged EXEC Term Interface Media Type STP Mode Physical Mode Physical Status Link Status Loop Status Partner Flow Control Definition Valid slot and port number separated by forward slashes. "Copper" or "Fiber" for combo port. Indicate the spanning tree mode of the port. Either "Auto" or fixed speed and duplex mode. The actual speed and duplex mode. Whether the link is Up or Down. Whether the port is in loop state or not. Whether the remote side is using flow control or not. Switching Commands 3-9 v1.0, July 2009