Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 461

Managed Switch CLI Manual, Release 8.0 (Switch) (Config) #radius server host auth 192.168.37.60 name Network1_RADIUS_Auth_Server port 1813 (Switch) (Config) #radius server host acct 192.168.37.60 name Network2_RADIUS_Auth_Server (Switch) (Config) #no radius server host acct 192.168.37.60 radius server key This command configures the key to be used in RADIUS client communication with the specified server. Depending on whether the 'auth' or 'acct' token is used, the shared secret is configured for the RADIUS authentication or RADIUS accounting server. The IP address or hostname provided must match a previously configured server. When this command is executed, the secret is prompted. Text-based configuration supports Radius server's secrets in encrypted and non-encrypted format. When you save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter the key along with the encrypted keyword. In the show running config command's display, these secret keys are displayed in encrypted format. You cannot show these keys in plain text format. Note: The secret must be an alphanumeric value not exceeding 16 characters. Format Mode radius server key {auth | acct} {} encrypted Global Config Field ipaddr dnsname password Description The IP address of the server. The DNS name of the server. The password in encrypted format. The following shows an example of the CLI command. radius server key acct 10.240.4.10 encrypted Management Commands v1.0, July 2009 7-56