Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 249

Managed Switch CLI Manual, Release 8.0 Format Modes show ip brief • Privileged EXEC • User EXEC Term Definition Default Time to Live Routing Mode The computed TTL (Time to Live) of forwarding a packet from the local router to the final destination. Shows whether the routing mode is enabled or disabled. Maximum Next Hops The maximum number of next hops the packet can travel. Maximum Routes The maximum number of routes the packet can travel. ICMP Rate Limit Interval Shows how often the token bucket is initialized with burst-size tokens. Burst-interval is from 0 to 2147483647 milliseconds. The default burst-interval is 1000 msec. ICMP Rate Limit Burst Shows the number of ICMPv4 error messages that can be sent during one burst- Size interval. The range is from 1 to 200 messages. The default value is 100 messages. ICMP Echo Replies Shows whether ICMP Echo Replies are enabled or disabled. ICMP Redirects Shows whether ICMP Redirects are enabled or disabled. The following shows example CLI display output for the command. (Switch) #show ip brief Default Time to Live 64 Routing Mode Disabled Maximum Next Hops 4 Maximum Routes 6000 ICMP Rate Limit Interval 1000 msec ICMP Rate Limit Burst Size 100 messages ICMP Echo Replies Enabled ICMP Redirects Enabled show ip interface This command displays all pertinent information about the IP interface. Format Modes show ip interface { | vlan | loopback } • Privileged EXEC • User EXEC Routing Commands v1.0, July 2009 4-14