Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 417

Managed Switch CLI Manual, Release 8.0 transport input telnet This command regulates new Telnet sessions. If enabled, new Telnet sessions can be established until there are no more sessions available. An established session remains active until the session is ended or an abnormal network error ends the session. Note: If the Telnet Server Admin Mode is disabled, Telnet sessions cannot be established. Use the ip telnet server enable command to enable Telnet Server Admin Mode. Default Format Mode enabled transport input telnet Line Config no transport input telnet Use this command to prevent new Telnet sessions from being established. Format Mode no transport input telnet Line Config transport output telnet This command regulates new outbound Telnet connections. If enabled, new outbound Telnet sessions can be established until the system reaches the maximum number of simultaneous outbound Telnet sessions allowed. An established session remains active until the session is ended or an abnormal network error ends it. Default Format Mode enabled transport output telnet Line Config Management Commands v1.0, July 2009 7-12