Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 416

Telnet Commands Managed Switch CLI Manual, Release 8.0 This section describes the commands you use to configure and view Telnet settings. You can use Telnet to manage the device from a remote management host. ip telnet server enable Use this command to enable Telnet connections to the system and to enable the Telnet Server Admin Mode. This command opens the Telnet listening port. Default Format Mode enabled ip telnet server enable Privileged EXEC no ip telnet server enable Use this command to disable Telnet access to the system and to disable the Telnet Server Admin Mode. This command closes the Telnet listening port and disconnects all open Telnet sessions. Format Mode no ip telnet server enable Privileged EXEC telnet This command establishes a new outbound Telnet connection to a remote host. The host value must be a valid IP address or host name. Valid values for port should be a valid decimal integer in the range of 0 to 65535, where the default value is 23. If [debug] is used, the current Telnet options enabled is displayed. The optional line parameter sets the outbound Telnet operational mode as 'linemode' where, by default, the operational mode is 'character mode'. The noecho option disables local echo. Format Modes telnet [debug] [line] [noecho] • Privileged EXEC • User EXEC Management Commands v1.0, July 2009 7-11