Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 294

Managed Switch CLI Manual, Release 8.0 If the class-name is specified the following fields are displayed: Term Class Name Class Type Class Layer3 Protocol Match Criteria Values Definition The name of this class. A class type of 'all' means every match criterion defined for the class is evaluated simultaneously and must all be true to indicate a class match. The Layer 3 protocol for this class. Possible values are IPv4 and IPv6. The Match Criteria fields are only displayed if they have been configured. Not all platforms support all match criteria values. They are displayed in the order entered by the user. The fields are evaluated in accordance with the class type. The possible Match Criteria fields are: Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Ethertype, Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Reference Class, Source IP Address, and Source Layer 4 Port. The values of the Match Criteria. If you do not specify the Class Name, this command displays a list of all defined DiffServ classes. The following fields are displayed: Term Class Name Class Type Definition The name of this class. (Note that the order in which classes are displayed is not necessarily the same order in which they were created.) A class type of 'all' means every match criterion defined for the class is evaluated simultaneously and must all be true to indicate a class match. Reference Class The name of an existing DiffServ class whose match conditions are being referenced by Name the specified class definition. show diffserv This command displays the DiffServ General Status Group information, which includes the current administrative mode setting as well as the current and maximum number of rows in each of the main DiffServ private MIB tables. This command takes no options. Format Mode show diffserv Privileged EXEC Quality of Service (QoS) Commands v1.0, July 2009 5-27