Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 248

Managed Switch CLI Manual, Release 8.0 no ip mtu This command resets the ip mtu to the default value. Format Mode no ip mtu Interface Config encapsulation This command configures the link layer encapsulation type for the packet. The encapsulation type can be ethernet or snap. Default Format Mode ethernet encapsulation {ethernet | snap} Interface Config Note: Routed frames are always ethernet encapsulated when a frame is routed to a VLAN. clear ip route all This command removes all the route entries learned over the network. Format clear ip route all Mode Privileged EXEC Protocol Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or RIP. Total Number The total number of routes. of Routes show ip brief This command displays all the summary information of the IP, including the ICMP rate limit configuration and the global ICMP Redirect configuration. Routing Commands v1.0, July 2009 4-13