Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 195

Managed Switch CLI Manual, Release 8.0 multiplier on the transmit interval that sets the TTL in local data LLDPDUs. The multiplier range is 2-10. The is the delay before re-initialization, and the range is 1-0 seconds. Default Format Mode • interval-30 seconds • hold-4 • reinit-2 seconds lldp timers [interval ] [hold ] [reinit ] Global Config no lldp timers Use this command to return any or all timing parameters for local data transmission on ports enabled for LLDP to the default values. Format Mode no lldp timers [interval] [hold] [reinit] Global Config lldp transmit-tlv Use this command to specify which optional type length values (TLVs) in the 802.1AB basic management set are transmitted in the LLDPDUs. Use sys-name to transmit the system name TLV. To configure the system name, see "snmp-server" on page 7-41. Use sys-descto transmit the system description TLV. Use sys-cap to transmit the system capabilities TLV. Use portdesc to transmit the port description TLV. To configure the port description, see See "description" on page 3-4. Default Format Mode all optional TLVs are included lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc] Interface Config Switching Commands v1.0, July 2009 3-159