Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 445

Managed Switch CLI Manual, Release 8.0 method1 [method2...] At least one from the following table: Keyword local none radius Description Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. no aaa authentication dot1x This command is used to remove the authentication at login. Format Mode no aaa authentication dot1x default Global Config write memory Use this command to save running configuration changes to NVRAM so that the changes you make will persist across a reboot. This command is the same as copy system:running config nvram:startup-config. Format Mode write memory Privileged EXEC SNMP Commands This section describes the commands you use to configure Simple Network Management Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can communicate with SNMP managers on your network. Management Commands v1.0, July 2009 7-40