Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 404

Managed Switch CLI Manual, Release 8.0 Field Poller Interval Description The number of seconds between successive samples of the counters associated with this data source. show sflow receivers Use this command to display configuration information related to the sFlow receivers. Format Mode show sflow receivers [] Privileged EXEC Field Description Receiver Index The sFlow Receiver associated with the sampler/poller. Owner String The identity string for receiver, the entity making use of this sFlowRcvrTable entry. Time Out Max Datagram Size Port IP Address The time (in seconds) remaining before the receiver is released and stops sending samples to sFlow receiver. The maximum number of bytes that can be sent in a single sFlow datagram. The destination Layer4 UDP port for sFlow datagrams. The sFlow receiver IP address. Address Type Datagram Version The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the value is 2. The sFlow protocol version to be used while sending samples to sFlow receiver. Example: The following shows example CLI display output for the command. (switch) #show sflow receivers 1 Receiver Index 1 Owner String Time out 0 IP Address 0.0.0.0 Address Type 1 Port 6343 Datagram Version 5 Maximum Datagram Size 1400 Utility Commands v1.0, July 2009 6-87