Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 452

Managed Switch CLI Manual, Release 8.0 Note: The parameter does not need to be unique, however; the and pair must be unique. Multiple entries can exist with the same , as long as they are associated with a different . The reverse scenario is also acceptable. The is the community name used when sending the trap to the receiver, but the is not directly associated with the SNMP Community Table, See "snmp-server community" on page39." Default Format Mode snmpv2 snmptrap [snmpversion ] Global Config no snmptrap This command deletes trap receivers for a community. Format Mode no snmptrap Global Config snmptrap snmpversion This command modifies the SNMP version of a trap. The maximum length of is 16 casesensitive alphanumeric characters. The parameter options are snmpv1 or snmpv2. Note: This command does not support a "no" form. Default Format Mode snmpv2 snmptrap snmpversion Global Config Management Commands v1.0, July 2009 7-47