Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 466

Managed Switch CLI Manual, Release 8.0 Field Description Host Address Server Name Port The IP address of the host. The name of the authenticating server. The port used for communication with the authenticating server. Type Specifies whether this server is a primary or secondary type. Current Host Address The IP address of the currently active authenticating server. Secret Configured Yes or No Boolean value that indicates whether this server is configured with a secret. Number of Retransmits The configured value of the maximum number of times a request packet is retransmitted. Message Authenticator A global parameter to indicate whether the Message Authenticator attribute is enabled or disabled. Time Duration RADIUS Accounting Mode The configured timeout value, in seconds, for request retransmissions. A global parameter to indicate whether the accounting mode for all the servers is enabled or not. RADIUS Attribute 4 A global parameter to indicate whether the NAS-IP-Address attribute has been Mode enabled to use in RADIUS requests. RADIUS Attribute 4 A global parameter that specifies the IP address to be used in NAS-IP-Address Value attribute used in RADIUS requests. The following shows example CLI display output for the command. (Switch) #show radius servers Cur Host Address Server Name Port Type rent * 192.168.37.200 Network1_RADIUS_Server 1813 Primary 192.168.37.201 Network2_RADIUS_Server 1813 Secondary 192.168.37.202 Network3_RADIUS_Server 1813 Primary 192.168.37.203 Network4_RADIUS_Server 1813 Secondary (Switch) #show radius servers name Current Host Address Server Name Type 192.168.37.200 Network1_RADIUS_Server Secondary 192.168.37.201 Network2_RADIUS_Server Primary 192.168.37.202 Network3_RADIUS_Server Secondary 192.168.37.203 Network4_RADIUS_Server Primary (Switch) #show radius servers name Default_RADIUS_Server Management Commands v1.0, July 2009 7-61