Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 434

Managed Switch CLI Manual, Release 8.0 Term User Name Connection From Idle Time Session Time Session Type Definition The name the user entered to log on to the system. IP address of the remote client machine or EIA-232 for the serial port connection. Time this session has been idle. Total time this session has been connected. Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH. User Account Commands This section describes the commands you use to add, manage, and delete system users. The 7000 series software has two default users: admin and guest. The admin user can view and configure system settings, and the guest user can view settings. Note: You cannot delete the admin user. There is only one user allowed with read/write privileges. You can configure up to five read-only users on the system. username This command adds a username-based authentication system. Format Mode username password [level level] [encrypted] Global Config Term Name Password level encrypted Definition The name of the user, up to 20 characters. The password for the users 8-64 characters. Specifies the user level. If not specified, the privilege level is 1. The value can be 1-15. Encrypted password you enter, copied from another device configuration. Management Commands v1.0, July 2009 7-29