Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 200

Managed Switch CLI Manual, Release 8.0 Term Definition Errors The number of invalid LLDP frames received on the port. Ageouts Total number of times a complete remote data entry was deleted for the port because the Time to Live interval expired. TLV Discards The number of TLVs discarded. TLV Unknowns Total number of LLDP TLVs received on the port where the type value is in the reserved range, and not recognized. TLV MED Total number of LLDP MED TLVs received on the local ports. TVL802.1 Total number of 802.1 LLDP TLVs received on the local ports. TVL802.3 Total number of 802.3 LLDP TLVs received on the local ports. show lldp remote-device Use this command to display summary information about remote devices that transmit current LLDP data to the system. You can show information about LLDP remote data received on all ports or on a specific port. Format Mode show lldp remote-device { | all} Privileged EXEC Term Definition Local Interface RemID Chassis ID Port ID System Name The interface that received the LLDPDU from the remote device. An internal identifier to the switch to mark each remote device to the system. The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC address of the device. The port number that transmitted the LLDPDU. The system name of the remote device. Example: The following shows example CLI display output for the command. Switching Commands v1.0, July 2009 3-164