Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 462

Managed Switch CLI Manual, Release 8.0 radius server msgauth This command enables the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode radius server msgauth Global Config Field ip addr dnsname Description The IP address of the server. The DNS name of the server. no radius server msgauth The no version of this command disables the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode no radius server msgauth Global Config radius server primary This command specifies a configured server that should be the primary server in the group of servers which have the same server name. Multiple primary servers can be configured for each number of servers that have the same name. When the RADIUS client has to perform transactions with an authenticating RADIUS server of specified name, the client uses the primary server that has the specified server name by default. If the RADIUS client fails to communicate with the primary server for any reason, the client uses the backup servers configured with the same server name. These backup servers are identified as the 'Secondary' type. Format Mode radius server primary {} Global Config Management Commands v1.0, July 2009 7-57