Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 420

Managed Switch CLI Manual, Release 8.0 no telnetcon timeout This command sets the Telnet connection session timeout value to the default. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Also, any keystroke activates the new timeout duration. Format Mode no telnetcon timeout Privileged EXEC show telnet This command displays the current outbound Telnet settings. In other words, these settings apply to Telnet connections initiated from the switch to a remote system. Format Modes show telnet • Privileged EXEC • User EXEC Term Definition Outbound Telnet The number of minutes an outbound Telnet session is allowed to remain inactive before Login Timeout being logged off. Maximum The number of simultaneous outbound Telnet connections allowed. Number of Outbound Telnet Sessions Allow New Indicates whether outbound Telnet sessions will be allowed. Outbound Telnet Sessions Management Commands v1.0, July 2009 7-15