Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 422

Managed Switch CLI Manual, Release 8.0 Format Mode ip ssh Privileged EXEC ip ssh protocol This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set. Default Format Mode 1 and 2 ip ssh protocol [1] [2] Privileged EXEC ip ssh server enable This command enables the IP secure shell server. Default Format Mode disabled ip ssh server enable Privileged EXEC no ip ssh server enable This command disables the IP secure shell server. Format Mode no ip ssh server enable Privileged EXEC sshcon maxsessions This command specifies the maximum number of SSH connection sessions that can be established. A value of 0 indicates that no ssh connection can be established. The range is 0 to 5. Default Format Mode 5 sshcon maxsessions Privileged EXEC Management Commands v1.0, July 2009 7-17