Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 57

Managed Switch CLI Manual, Release 8.0 no spanning-tree port mode all This command sets the Administrative Switch Port State for all ports to disabled. Format Mode no spanning-tree port mode all Global Config spanning-tree edgeport all This command specifies that every port is an Edge Port within the common and internal spanning tree. This allows all ports to transition to Forwarding State without delay. Format Mode spanning-tree edgeport all Global Config no spanning-tree edgeport all This command disables Edge Port mode for all ports within the common and internal spanning tree. Format Mode no spanning-tree edgeport all Global Config spanning-tree bpduforwarding Normally a switch will not forward Spanning Tree Protocol (STP) BPDU packets if STP is disabled. However, if in some network setup, the user wishes to forward BDPU packets received from other network devices, this command can be used to enable the forwarding. Default Format Mode 2 spanning-tree bpduforwarding Global Config Switching Commands v1.0, July 2009 3-21