Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 288

Managed Switch CLI Manual, Release 8.0 redirect This command specifies that all incoming packets for the associated traffic stream are redirected to a specific egress interface (physical port or port-channel). Note: This command is not available on the GSM7328Sv1 or GSM7352Sv1 platforms. Format redirect Mode Policy-Class-Map Config Incompatibilities Drop, Mirror conform-color Use this command to enable color-aware traffic policing and define the conform-color class map. Used in conjunction with the police command where the fields for the conform level are specified. The parameter is the name of an existing DiffServ class map. Note: This command may only be used after specifying a police command for the policyclass instance. Format Mode conform-color Policy-Class-Map Config class This command creates an instance of a class definition within the specified policy for the purpose of defining treatment of the traffic class through subsequent policy attribute statements. The is the name of an existing DiffServ class. Note: This command causes the specified policy to create a reference to the class definition. Quality of Service (QoS) Commands v1.0, July 2009 5-21