Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 333

Managed Switch CLI Manual, Release 8.0 show running-config interface This command shows the current configuration on a particular interface. The interface could be a physical port or a virtual port-like a LAG or VLAN. The output captures how the configuration differs from the factory default value. Format Mode show running-config interface {} | VLAN | LAG } Interface Config show sysinfo This command displays switch information. Format Mode show sysinfo Privileged EXEC Term Definition Switch Description Text used to identify this switch. System Name Name used to identify the switch.The factory default is blank. To configure the system name, see "snmp-server" on page 7-41. System Location Text used to identify the location of the switch. The factory default is blank. To configure the system location, see "snmp-server" on page 7-41. System Contact Text used to identify a contact person for this switch. The factory default is blank. To configure the system location, see "snmp-server" on page 7-41. System Object ID The base object ID for the switch's enterprise MIB. System Up Time The time in days, hours and minutes since the last switch reboot. MIBs Supported A list of MIBs supported by this agent. show tech-support Use the show tech-support command to display system and configuration information when you contact technical support. The output of the show tech-support command combines the output of the following commands: • show version • show sysinfo Utility Commands v1.0, July 2009 6-16