Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 208

Managed Switch CLI Manual, Release 8.0 no lldp med transmit-tlv Use this command to remove a TLV. Format Mode no lldp med transmit-tlv all [capabilities] [network-policy] [ex-pse] [ex-pd] [location] [inventory] Global Config show lldp med Use this command to display a summary of the current LLDP MED configuration. Format Mode show lldp med Privileged Exec Term Fast Start Repeat Count Device Class Definition The number of LLDP PDUs that will be transmitted when the protocl is enabled. The local device's MED Classification. There are four different kinds of devices, three of them represent the actual end points (classified as Class I Generic[IP Communication Controller etc.], Class II Media Conference Bridge etc.], Class III Communication [IP Telephone etc.]. Class IV Network Connectivity Device, which is typically a LAN Switch, Router, IEEE 802.11 Wireless Access Point, etc. Example: The following shows example CLI display output for the command. (switch) #show lldp med LLDP MED Global Configuration Fast Start Repeat Count: 3 Device Class: Network Connectivity (switch) # Switching Commands v1.0, July 2009 3-172