Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 25

Chapter 2 Stacking Commands The Stacking Commands chapter includes the following sections: • "Dedicated Port Stacking" on page 2-1 • "Front Panel Stacking Commands" on page 2-10 Note: The commands in this chapter are in one of two functional groups: Note: Show commands display switch settings, statistics, and other information. Note: Configuration commands configure features and options of the switch. For every configuration command, there is a show command that displays the configuration setting. The Primary Management Unit is the unit that controls the stack. Dedicated Port Stacking This section describes the commands you use to configure dedicated port stacking. stack This command sets the mode to Stack Global Config. Format Mode stack Global Config 2-1 v1.0, July 2009