Samsung SPH-M800 User Manual (user Manual) (ver.f10) (English) - Page 106

To retrain the device to use your voice: 1. Press . 2. From the "Say a Command" page, touch Settings > Adaptation > Adapt Voice > Start. 3. Hold the device so that the microphone is approximately six inches away from your mouth and you can clearly read the onscreen number sequences. 4. Repeat either the digits or words shown onscreen using a normal tone of voice. Ⅲ If the device cannot recognize your words, it will continue to display the same information onscreen. 5. Repeat the previous step for the remaining sets of digits or words. 6. When you are finished with a full session, you will reach a screen that reads, "Adapting." Note It is recommended that you perform the complete Adapt Voice session at least once to achieve the maximum benefit of this feature. If a partial adaptation is performed, you can always return later and resume the process from the halfway point. Resetting Voice Recognition 1. Press . 2. From the "Say a Command" page, touch Settings > Adaptation > Reset Voice. (The device displays a reset voice dialog.) 3. Touch Yes to reset the voice recognition parameters or No to exit. 94 Section 2H. Speech to Action