Acer Altos easyStore M2 User Manual - Page 109
Linear or RAID, swapping HDDs affects the storage system, refer to Disk
View all Acer Altos easyStore M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
87 • The current status of each HDD: • Linear or RAID n - The HDD is working properly as part of the specified configuration. • New - The HDD has been added to the storage system but is not currently being used. • Spare - The HDD is acting as a spare disk for the RAID. • Rebuilding - The HDD is being rebuilt (for example, when a failed disk is replaced) • N/A - The HDD is detected but not available for use (for example, when it has failed) • The hotplug indicator: • RED - Removing the HDD will cause the RAID to fail. • YELLOW - Removing the HDD will cause RAID degradation. • GREEN - Removing the HDD will not affect the RAID. Note: Whenever you add or remove a HDD from the storage system, you must click Refresh to update this page. For detailed information about RAIDs and how adding, removing, or swapping HDDs affects the storage system, refer to "Disk configurations" on page 232. You can change the disk configuration or amount of storage space that is allocated for shared folders at any time. However, for additional security, you must enter your administrator password to be able to make these changes.