Acer Altos easyStore M2 User Manual - Page 268
Pull the lever., Slide the HDD carrier from the chassis.
View all Acer Altos easyStore M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
246 8 Configuring the storage system (2) Remove the HDD carrier. [1] Press the HDD carrier latch. [2] Pull the lever. [3] Slide the HDD carrier from the chassis. (3) Install the new HDD to the HDD carrier. [1] Insert the new drive into the right side of the carrier aligning the pins into the HDD's mounting holes. [2] Slightly bend the left side rail and insert the pins into the HDD's mounting holes.
8 Configuring the storage system
246
(2)
Remove the HDD carrier.
[1]
Press the HDD carrier latch.
[2]
Pull the lever.
[3]
Slide the HDD carrier from the chassis.
(3)
Install the new HDD to the HDD carrier.
[1]
Insert the new drive into the right side of the carrier
aligning the pins into the HDD’s mounting holes.
[2]
Slightly bend the left side rail and insert the pins into the
HDD’s mounting holes.