Acer Altos easyStore M2 User Manual - Page 192

170 4 Managing the storage system To change this Do this The packet size for transferring data Specify whether or not to transfer larger data packets between the storage system and the computers in your network by selecting or clearing the Jumbo Frames check box. If you clear this option, the storage system will use 1514-byte packets. If you select this option, you can specify a larger packet size (from 1514 to 9014 bytes). Note: Using jumbo frames allows you to transfer data more quickly. However, you can select this option only if your network, Ethernet switch, and the network interface cards (NICs) on the computers in your network support the specified packet size. To determine whether you can use jumbo frames, refer to the documentation for those components. The FTP settings If you want to use the storage system as an FTP server, select the Enable FTP server check box. If you do not want to use the storage system as an FTP server, clear this option. For information about accessing the storage system using FTP, refer to "Accessing shared folders" on page 183. The UPnP settings If you want to enable the UPnP discovery protocol support, select the Enable UPnP service check box. If you want to disable the UPnP discovery protocol support, clear this option. 4 Click Apply. 5 When the confirmation message displays, click OK. Note: If you changed the IP address of the storage system, you must now access the IPStor Express Manager using the new IP address.