Canon MultiPASS C635 User Manual - Page 165
Color or BC-20 Black, The BC-20 BJ Cartridge
View all Canon MultiPASS C635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Message DIALING DOC TOO LONG DOCUMENT READY ECM RX ECM TX HANG UP PHONE INSTALL BC-20/21 INSTALL BC-21 LOAD PAPER Error Code - #003 - - - - - - - Cause Action The MultiPASS is dialing the receiving fax machine. It took more than 32 minutes to send or copy a document. It took more than 32 minutes to receive a document. The document is longer than 39.4 inches (1 m). The document in the ADF is ready for faxing, scanning, or copying. The MultiPASS is receiving a fax using ECM. The MultiPASS is sending a fax using ECM. The telephone is off hook. A BJ cartridge other than the BC-21e or BC-20 is installed, so the MultiPASS cannot print any received faxes, or make copies. The BC-20 BJ Cartridge is installed. The MultiPASS is out of paper (the sheet feeder is empty). Press STOP if you want to cancel the transmission. Divide the document and send or copy each part separately. Contact the other party. Have them divide the document and send each part separately. Use a copy machine to make a reduced copy of the document and send the copy. Send the fax, scan the document, or make the copy. ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to receive quickly, or if you know your local lines are in good condition. ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to transmit quickly, or if you know your local lines are in good condition. Place the telephone properly into its cradle. Remove the BJ cartridge and install the BC-21e Color or BC-20 Black BJ Cartridge. Remove the BC-20 cartridge and install the BC-21e cartridge. Load paper in the sheet feeder. Make sure the stack does not exceed the limit mark. Then press START/COPY. 8-12 Troubleshooting Chapter 8