Canon MultiPASS C635 User Manual - Page 182
General Problems
View all Canon MultiPASS C635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
General Problems Problem The MultiPASS has no power Cause The power cord may not be securely plugged into the unit. The power cord may not be supplying power. Solution Make sure the power cord is plugged securely into the unit and into a wall outlet. If the power cord is connected to a power strip, make sure the strip is connected to an outlet and turned on. Check the power cord by substituting another, or by using a voltmeter to test it for continuity. The MultiPASS will not print reports The MultiPASS may have a BC-21e Color BJ Cartridge installed, and its black BJ tank may be empty. A cartridge other than the BC-21e Color or BC-20 Black BJ Cartridge may be installed. Replace the empty BJ tank (see page 7-16). Install the BC-21e Color or BC-20 Black BJ Cartridge. Nothing appears in the LCD display The MultiPASS may not be receiving power. Check the plug and be sure it is firmly plugged into the power connector and the wall outlet. If the display remains blank, unplug the MultiPASS, wait five seconds, then plug it in again. Troubleshooting Chapter 8 Troubleshooting 8-29