Canon XF705 Instruction Manual - Page 104
INPUT 1 Mic Att.] or [INPUT 2 Mic Att.], INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Recording Audio Options [Normal]: [High]: For recording audio under usual conditions. For recording audio at a higher volume (+6 dB). 104 Microphone Attenuator (Built-in Microphone) If you selected [Built-in Mic] as the audio input for an audio channel (A 97), you can activate the built-in microphone's attenuator (12 dB). 1 Select [Built-in Mic Att.]. > [¡ # Audio Setup] > [Built-in Mic Att.] 2 Select [On] and then press SET. Microphone Sensitivity (INPUT Terminals) If you selected [INPUT Terminals] as the audio input for an audio channel (A 97), one of the INPUT switches is set to ANALOG, and the corresponding ANALOG switch is set to MIC or MIC+48V, you can select the external microphone's sensitivity. 1 Select the menu setting for the INPUT terminal used. > [¡ $ Audio Setup] > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming] 2 Select the desired level and then press SET. • You can select one of 5 sensitivity levels from -12 dB to +12 dB. Microphone Attenuator (INPUT Terminals) If you selected [INPUT Terminals] as the audio input for an audio channel (A 97), one of the INPUT switches is set to ANALOG, and the corresponding ANALOG switch is set to MIC or MIC+48V, you can activate the external microphone's attenuator (20 dB). 1 Select the menu setting for the INPUT terminal used. > [¡ $ Audio Setup] > [INPUT 1 Mic Att.] or [INPUT 2 Mic Att.] 2 Select [On] and then press SET. Microphone Attenuator (MIC Terminal) If you selected [MIC Terminal] as the audio input for an audio channel (A 97), you can activate the external microphone's attenuator (20 dB). 1 Select [MIC Att.]. > [¡ $ Audio Setup] > [MIC Att.] 2 Select [On] and then press SET. Low-Cut Filter (MIC Terminal) If you selected [MIC Terminal] as the audio input for an audio channel (A 97), you can activate the external microphone's low-cut filter. 1 Select [MIC Low Cut]. > [¡ $ Audio Setup] > [MIC Low Cut] 2 Select [On] and then press SET. • When you activate the low-cut filter, some low-frequency sounds may be suppressed along with the sound of wind.