Canon XF705 Instruction Manual - Page 130
Master Pedestal], [Master Black Red], Automatic], [Slope], [Point] only when [Knee]
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Custom Picture Settings 130 Menu items [Area A Revision Phase], [Area B Revision Phase] [Other Functions]* [Over 100%] Setting options and additional information -18 to 18 (±0) These settings adjust the amount of correction applied to the color phase in the corrected area (A or B, respectively). [Through], [Press], [Clip] Determines how the camcorder handles video signals exceeding 100%. When [Gamma] is set to [PQ], [HLG] or [Canon Log 3], this setting is not available. [Through]: Leave the signal unchanged. [Clip]: Clip the signal at 100%. [Press]: Compress a signal of up to 108% down to 100% levels. * Settings not available when infrared recording is activated. NOTES • If editing of the custom picture file's detailed settings is enabled ( > [/ ! Custom Picture] > [Activate Other Settings] is set to [On]), when an optional RC-V100 Remote Controller is connected to the camcorder, the following custom picture settings can be changed using the buttons and dials on the remote controller. - [Other Settings] > [Black] > [Master Pedestal], [Master Black Red], [Master Black Blue] - [Other Settings] > [Black Gamma] > [Level] - [Other Settings] > [Knee] > [Automatic], [Slope], [Point] (only when [Knee] > [Activate] is set to [On]) - [Other Settings] > [Sharpness] > [Level] - [Other Settings] > [White Balance] > [R Gain], [B Gain]