Canon XF705 Instruction Manual - Page 72
Select [Low], [Normal] or [High] and then press SET., Setting the Zoom Speed
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Zooming Grip zoom rocker: Approximate zoom speeds (time required to zoom end-to-end) [v & Camera Setup] > [v % Camera Setup] > [Zoom Speed Level] [Grip Zoom Speed] [Constant Speed] [Low] [Normal] [High] 72 [Constant] [1] (slowest) [16] (fastest) 4 min 38 sec 4.2 sec 2 min 2.6 sec 1 min 0.9 sec* [Variable] - 4.2 sec - 4 min 38 sec 2.6 sec - 2 min 1 sec* - 1 min * When the zoom speed is too fast, it will be more difficult to focus while zooming. Setting the Zoom Speed 1 To set the overall speed level, select [Zoom Speed Level]. > [v % Camera Setup] > [Zoom Speed Level] 2 Select [Low], [Normal] or [High] and then press SET. • When [Zoom Speed Level] is set to [High], the camcorder may pick up and record lens operation sounds. 3 Select [Grip Zoom Speed]. > [v & Camera Setup] > [Grip Zoom Speed] 4 Select the desired option and then press SET. • If you selected [Constant] or [User Setting], select the constant speed or customize the zoom speed pattern with the following procedures. Options [Constant]: [Variable]: [User Setting]: Select one of 16 constant zoom speeds. Variable zoom speed (zoom faster the harder you press). You can customize up to 3 zoom speed patterns, setting the desired zoom speed for 5 individual pressure levels. You can, for example, set a pattern where the grip zoom rocker only starts to react beyond a certain pressure level to avoid accidental zoom operations. To select the constant speed level 1 Select [Constant Speed]. > [v & Camera Setup] > [Constant Speed] 2 Select the desired speed (1 to 16) and then press SET. To customize the [User Setting] zoom speed pattern 1 Select [Users Settings]. [v & Camera Setup] > [Users Settings] 2 Push the joystick left/right to select the zoom speed pattern ([User 1] to [User 3]) you want to use. • To use the preset zoom speed pattern as is, select [OK] and then press SET. The rest of the procedure is not necessary. Otherwise, continue the procedure to customize the zoom speed pattern. 3 Select [Edit] and then press SET. 4 Push the joystick up/down to select the desired speed (0 = disabled, 1 to 16) and then press SET. • Change the speed for the rest of the pressure levels in the same way. 5 Select [Set] and then press SET. • To reset the zoom speed pattern to its preset values, select [Reset] instead. NOTES • When > [v % Camera Setup] > [High-Speed Zoom] is set to [On] and the grip rocker's zoom speed is set to [Variable], when you operate the zoom in record standby mode, the actual zoom speed will be as if the overall speed level were set to [High]. While recording, the zoom speed level will follow the speed level set in the menu.