Canon XF705 Instruction Manual - Page 37
Recovering Clips, tead of a thumbnail image and then pre
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Using SD Cards Recovering Clips Some actions, such as suddenly turning off the camcorder or removing the SD card while data is being recorded, can cause data errors in the recorded clip. Operating modes: 37 1 Open the index screen with the clip you wish to recover (A 133). 2 Select the desired clip (a clip with a yellow icon instead of a thumbnail image) and then press SET to open the clip menu. 3 Select [Recover Clip] and then press SET. 4 Select [OK] and then press SET. • The camcorder will attempt to recover the corrupted data. 5 When the confirmation message appears, press SET. NOTES • In the index screen, recovered MP4 clips appear with a special playback icon instead of the usual thumbnail. • This procedure may delete clips shorter than 0.5 seconds in length. • In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted or the card is physically damaged. • Only clips recorded with this camcorder can be recovered. Photos cannot be recovered.