Canon XF705 Instruction Manual - Page 137

Playback Controls When you play back a clip, operate the buttons on the camcorder, the joystick and joystick guide or the supplied wireless controller. You can press the DISP button to show/hide the joystick guide. Refer to the following table. Playback 137 Available playback types Playback type Operation Fast playback Playback at approximately 5x the normal speed. Buttons: Press the Ø or × button. Wireless controller: Press the Ø or × button. Frame advance/reverse Joystick: During playback pause, push the joystick up or down. Wireless controller: During playback pause, press the Ô or Ó button. Jump back/forward within the clip Joystick: During playback, push the joystick up or down. You can press the FUNC button to change the jump interval between [sec] to jump 30 seconds forward/ 10 seconds back, and [%] to jump 10% of the clip. Skip to the beginning of the next clip Buttons: Press the Ù button. Joystick: Push the joystick right. Wireless controller: Press the ß button. Skip to the beginning of the current clip Buttons: Press the Ú button. Joystick: Push the joystick left. Wireless controller: Press the à button. Skip to the previous clip Buttons: Press the Ú button twice. Joystick: Push the joystick left twice. Wireless controller: Press the à button twice. Return to normal playback mode Buttons: Press the Ò button. Joystick: Press the joystick itself (SET button). Wireless controller: Press the Ò button. NOTES • There is no audio during any of the playback types listed in the previous table. • You can press the Ò button during fast playback to return to playback at normal speed. • During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture. • The speed indicated on the screen is approximate. • The amount of time equivalent to moving one frame forward is longer than moving one frame back and depends on the video format used: approx. 0.5 seconds for XF-AVC and MP4 clips and 1 second for XF-HEVC clips.