Canon XF705 Instruction Manual - Page 181
Photos, Taking Photos
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
8 Photos Taking Photos You can record photos to SD card B (only) when the camcorder is in record standby mode. The photo size is the same, regardless of the video configuration currently in use. Resolution currently in use 3840x2160, 1920x1080 Photo size 1920x1080 Approximate file size per image 880 KB 181 Operating modes: 1 Set an assignable button to [Photo] (A 119). 2 When the camcorder is in record standby mode, press the assignable button to take a photo. • 7 and the number of available photos appear at the top right of the screen. The maximum number of available photos displayed on the screen is 9999. • The SD CARD 3 access indicator will illuminate in red as the photo is being recorded. • You can also press the PHOTO button on the supplied wireless controller. IMPORTANT • Observe the following precautions while the SD CARD 3 access indicator is illuminated in red. Failure to do so may result in permanent data loss. - Do not open the SD CARD 3 card slot cover and do not remove the card. - Do not disconnect the power source or turn off the camcorder. NOTES • Photos cannot be taken in the following cases: - When pre-recording is activated. - When slow motion recording is activated. - When Browser Remote is activated. • If the LOCK switch on the SD card is set to prevent writing, you will not be able to record photos. Change the position of the LOCK switch in advance.