Canon XF705 Instruction Manual - Page 32
Removing the Shoulder Pad, Using a Tripod
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Preparing the Camcorder Removing the Shoulder Pad The shoulder pad comes originally attached to the camcorder. You can remove it if you prefer a different 32 configuration. Use a Phillips head ("crosshead") screwdriver to remove the screw as shown in the illustration and remove the shoulder pad. • Be careful not to lose the shoulder pad or its screw after removing them. Using a Tripod You can mount the camcorder on any tripod with a 0.64 cm (1/4") or 0.95 cm (3/8") mounting screw. Screw holes for tripods Screw holes for the optional TA-100 Tripod Adapter IMPORTANT • Using tripods with mounting screws longer than the depth of the screw hole used (A 15) may cause damage to the camcorder.
Preparing the Camcorder
32
Removing the
S
houlder Pad
The shoulder pad comes originally attached to the
camcorder. You can remove it if you prefer a different
configuration.
U
s
e a Phillip
s
head ("cro
ss
head")
s
crewdriver to
remove the
s
crew a
s
s
hown in the illu
s
tration and
remove the
s
houlder pad.
•
Be careful not to lose the shoulder pad or its screw
after removing them.
U
s
ing a Tripod
You can mount the camcorder on any tripod with a 0.64 cm (1/4") or 0.95 cm (3/8") mounting screw.
IMPORTANT
•
Using tripods with mounting screws longer than the depth of the screw hole used (
A
15) may cause damage
to the camcorder.
Screw holes for tripods
Screw holes for the optional
TA-100 Tripod Adapter