Canon XF705 Instruction Manual - Page 43
controller, optional RC-V100 Remote Controller or Browser, MP4 Join Tool
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Recording Video • Any metadata settings you may have set (A 110) will be recorded with the clips you record. You can also have the custom picture settings in use saved with the recorded XF-HEVC or XF-AVC clips (A 125). • The maximum continuous recording time of a single clip is 6 hours. After that, a new clip will be created automatically and recording will continue as a separate clip. • If the LOCK switch on the SD card is set to prevent writing, you will not be able to record clips. Change the 43 position of the LOCK switch in advance. • A video recording will be saved as separate clips in the following cases: - When the camcorder switches to the other SD card while recording video due to the relay recording function (A 36). - When recording clips on an SDHC card, the video (stream) file in the clip will be split approximately every 4 GB. Playback with the camcorder will be continuous. After saving separate split MP4 clips to a computer, you can use MP4 Join Tool to join the files and save them as a single clip (A 153). • Depending on the clip, the camcorder may adjust some controls internally to display a more suitable image on the LCD screen and viewfinder. - When the [Gamma] setting in the custom picture file is set to a setting other than [Canon Log 3], the camcorder will produce an image that approximates the look of video displayed on a compatible monitor correctly configured. - When the [Gamma] setting in the custom picture file is set to [Canon Log 3], the camcorder will produce colors that approximate the look of the BT.709 color space, regardless of the color space used for recording. Locking the Camcorder's Controls (Key Lock) You can set the KEY LOCK switch to C (key lock) to lock all the physical controls (buttons and switches) on the camcorder, save for the REC buttons*. This is useful in preventing settings from being changed due to inadvertently pressing one of the buttons. Return the KEY LOCK switch to the position to reactivate the controls. When the camcorder's controls are locked, you can still operate the camcorder using the supplied wireless controller, optional RC-V100 Remote Controller or Browser Remote application. * In mode only, you can choose to lock also the REC buttons with the >[B $ System Setup] > [Key Lock] setting. Recording in Full Auto Mode Set the FULL AUTO switch to ON to set the camcorder to full auto mode. In full auto mode, the camcorder automatically sets the aperture, gain, shutter speed, and white balance. The camcorder will continuously adjust the brightness and white balance automatically*. The focus mode, however, will not be set to autofocus. * The light metering mode (A 64) will be set to [Standard], AE shift (A 63) will be set to [±0] and the AGC limit (A 58) will be set to [Off/33 dB].