Canon XF705 Instruction Manual - Page 21
Using a Power Outlet, Connect the power cord to the compact power adapter
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Removing the Battery Pack 1 Set the Q switch to OFF. 2 Holding down the BATTERY RELEASE button, slide the battery pack up and then pull it out. Preparing the Power Supply 21 Checking the Remaining Battery Charge When the camcorder is turned on, you can check the approximate remaining battery usage time (in minutes) by looking at any recording/playback screen or the [Battery/Hour Meter] status screen (A 203). You can also check the approximate charge level on the battery pack itself. Press the CHECK button on the battery pack. An indicator will light for approximately 3 seconds and show the approximate remaining battery charge. 0-25% 26-50% 51-75% 76-100% Battery charge indicator CHECK button Using a Power Outlet You can also power the camcorder directly from a power outlet using the supplied CA-CP200 L Compact Power Adapter. While the camcorder is powered using a power outlet, you can replace the battery pack even when the camcorder is turned on. 1 Connect the power cord to the compact power adapter and plug it into a power outlet. 2 Connect the compact power adapter's DC plug to the DC IN terminal on the camcorder. IMPORTANT • Make sure to turn off the camcorder before connecting or disconnecting the compact power adapter. DC IN • When using the compact power adapter, do not fix it terminal ቢ permanently to one place as this may cause a malfunction. ባ Compact power adapter