Canon XF705 Instruction Manual - Page 114
Reviewing a Recording, elect [Review Recording].
View all Canon XF705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Reviewing a Recording Reviewing a Recording 114 If you set an assignable button to [Review Recording] in advance, you can review all or part of the last clip recorded even with the camcorder set to mode. Operating modes: 1 Set an assignable button to [Review Recording] in advance (A 119). 2 To set the review length, select [Review Recording]. > [B % System Setup] > [Review Recording] 3 Select the desired option and then press SET. 4 After you finish recording a clip, press the assignable button. • The last clip that was recorded is played back for the selected duration. [Ð REVIEW] appears at the top of the screen. • While the clip is reviewed, there will be no sound from the built-in speaker but the audio will be output from the × (headphone) terminal, HDMI OUT terminal and SDI terminal. • You can use the joystick to jump back/forward within the clip (A 137). • Press the CANCEL button to stop reviewing the clip and return the camcorder to record standby mode. • After the clip finishes playing back, the camcorder returns to record standby mode. Options [Entire Clip]: [Last 4 sec]: Allows you to review the entire clip. Allows you to review just the last 4 seconds of the clip. NOTES • If the camcorder switched SD cards during a recording, the camcorder will play back the clip on the card most recently recorded on.