Canon XF705 Instruction Manual - Page 125

Custom Picture Settings Copying Custom Picture Files You can transfer custom picture files between the camcorder and SD card B. Copying a File from the Camcorder to SD Card B 1 Insert a card into the camcorder's SD card slot B. 2 Select a custom picture file (A 123). 3 Select [Copy to SD Card B]. > [/ ! Custom Picture] > [File] > [Copy to SD Card B] 4 Select the destination file and then press SET. • Select an existing custom picture file to overwrite it or [New File] to save the settings as a new custom picture file on the card. 5 Select [OK] and then press SET. • The file on SD card B will be overwritten or a new file will be created on the card. 6 When the confirmation message appears, press SET. Replacing a File in the Camcorder with a File on SD Card B 1 Insert the card with the desired custom picture file into the camcorder's SD card slot B. 2 Select an unprotected custom picture file that you wish to replace (A 123). 3 Select [Load from SD Card B]. > [/ ! Custom Picture] > [File] > [Load from SD Card B] 4 Select the file with the settings that you want to replicate and then press SET. 5 Select [OK] and then press SET. • The file in the camcorder will be overwritten by the one on SD card B. 6 When the confirmation message appears, press SET. 125 Embedding the Custom Picture File in XF-HEVC or XF-AVC Clips After adjusting the various settings, you can record the custom picture file in use together with the metadata of XF-HEVC or XF-AVC clips. When an XF-HEVC or XF-AVC clip has an embedded custom picture file, you can check the settings used to record the clip on the [Clip Info] screen (A 140). 1 Select [Add / File]. > [3 " Recording/Media Setup] > [Metadata] > [Add / File] 2 Select [On] and then press SET. • When [Off] is selected, the custom picture file is not recorded with the clips.