Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 106
Before You Begin, You may need to use different programs than those provided with
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Figure 3-23. Hard-Drive ID Numbers ID 0 ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 0 ID 1 ID 2 ID 3 ID 4 Before You Begin NOTICE: Before you attempt to remove or install a drive while the system is running, see the documentation for the optional SAS RAID controller card to ensure that the host adapter is configured correctly to support hot-plug drive removal and insertion. NOTE: It is recommended that you use only drives that have been tested and approved for use with the SAS backplane board. You may need to use different programs than those provided with the operating system to partition and format the hard drives. NOTICE: Do not turn off or reboot your system while the drive is being formatted. Doing so can cause a drive failure. 106 Installing System Components