Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 138
Installing the Power Distribution Board, System Board.
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Figure 3-36. Removing and Installing the Power Distribution Board 2 1 3 4 1 retention notches (3) 3 screws (7) 2 power distribution board 4 retention tabs (3) Installing the Power Distribution Board 1 Position the three retention slots on the power distribution board with the three retention tabs on the bottom of the chassis. See Figure 3-36. 2 Secure the power distribution board with the seven screws. 3 Install the system board. See step 4 through step 14 in "Installing the System Board." 4 Install the power supplies. See "Replacing a Power Supply" on page 72. 138 Installing System Components
138
Installing System Components
Figure 3-36.
Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1
Position the three retention slots on the power distribution board with the
three retention tabs on the bottom of the chassis. See Figure 3-36.
2
Secure the power distribution board with the seven screws.
3
Install the system board. See step 4 through step 14 in "Installing the
System Board."
4
Install the power supplies. See "Replacing a Power Supply" on page 72.
1
retention notches (3)
2
power distribution board
3
screws (7)
4
retention tabs (3)
1
4
3
2