Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 76
To access the PEM board, remove the cooling shroud. See
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
To access the PEM board, remove the cooling shroud. See Figure 3-9. Figure 3-9. Removing and Installing the PEM Cooling Shroud 1 2 3 1 cooling shroud 3 snaps (4) 2 alignment pins (4) Replacing the PEM or PEM Shell 1 Replace the cooling shroud 2 Rotate the PEM so the PEM board (4-processor systems) or air baffles (2-processor systems) face downwards. 3 Rotate the PEM handle to the fully open position. 4 Align the three guide pins on each side of the PEM with the corresponding slots in the sides of the chassis. See Figure 3-7. 76 Installing System Components
76
Installing System Components
To access the PEM board, remove the cooling shroud. See Figure 3-9.
Figure 3-9.
Removing and Installing the PEM Cooling Shroud
Replacing the PEM or PEM Shell
1
Replace the cooling shroud
2
Rotate the PEM so the PEM board (4-processor systems) or air baffles
(2-processor systems) face downwards.
3
Rotate the PEM handle to the fully open position.
4
Align the three guide pins on each side of the PEM with the corresponding
slots in the sides of the chassis. See Figure 3-7.
1
cooling shroud
2
alignment pins (4)
3
snaps (4)
2
3
1