Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 50
Enabled, All Ports On, Only Back Ports On, Enabled with, Enabled with iSCSI Boot, Disabled, Table 2-5.
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 2-5. Integrated Devices Screen Options Option Description Integrated SAS/RAID Controller (Enabled default) Enables or disables the integrated SAS controller. Optical Drive Controller (On default) Enables or disables the integrated optical drive controller. User Accessible USB Ports (All Ports On default) Enables or disables the system's user accessible USB ports. Options are All Ports On, Only Back Ports On, and All Ports Off. Internal USB Port Enables or disables the system's internal USB port. (On default) SD Card Port Enables or disables the system's internal SD card port. NOTE: This port is dedicated to a hypervisor, if installed. Embedded Gb NICx (NIC1 default: Enabled with PXE; Other NICs: Enabled) Enables or disables the system's integrated NICs. Options are Enabled, Enabled with PXE, Enabled with iSCSI Boot, and Disabled. PXE support allows the system to boot from the network. Changes take effect after the system reboots. MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. This field does not have user-selectable settings. Capability Detected Displays the NIC features provided by the NIC hardware key installed in the TOE_KEY socket on the system board. NOTE: Some features may require the installation of an additional driver. 50 Using the System Setup Program