Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 133
Pull up the spring-loaded blue retention pin located in the center of, the system board
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
12 Remove the RAID battery compartment: a Lift the snap lever and gently pull the RAID battery compartment straight up. See Figure 3-34. b Lift the battery compartment away from the side of the chassis. Figure 3-34. Removing and Installing the RAID Battery Compartment 1 2 3 4 1 RAID battery compartment 3 securing tabs (2) 2 release tab 4 securing slots (2) 13 Remove the system board: a Pull up the spring-loaded blue retention pin located in the center of the system board, and then slide the system board toward the front of the chassis until it stops. See Figure 3-35. Installing System Components 133
Installing System Components
133
12
Remove the RAID battery compartment:
a
Lift the snap lever and gently pull the RAID battery compartment
straight up. See Figure 3-34.
b
Lift the battery compartment away from the side of the chassis.
Figure 3-34.
Removing and Installing the RAID Battery Compartment
13
Remove the system board:
a
Pull up the spring-loaded blue retention pin located in the center of
the system board, and then slide the system board toward the front of
the chassis until it stops. See Figure 3-35.
1
RAID battery compartment
2
release tab
3
securing tabs (2)
4
securing slots (2)
2
1
3
4