Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 86
TOE/iSCSI Key (Optional
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Figure 3-15. Installing a USB Memory Key 1 2 1 USB memory key 2 USB memory key connector 5 Close the system. See "Opening the System" on page 65. 6 Reconnect the system to power and restart the system. 7 Enter the System Setup program and verify that the USB key has been detected by the system. See "Using the System Setup Program" on page 43. TOE/iSCSI Key (Optional) TOE, iSCSI, and other future functionalities for the system's integrated NICs are enabled by installing an optional NIC hardware key in the TOE_KEY socket on the system board. CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. NOTE: TOE Operating system support and the Microsoft® scalable network pack are required for TOE functionality. 86 Installing System Components