Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 121
Installing the Chassis Intrusion Switch, Close the system. See Closing the System
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Figure 3-29. Removing and Installing the Chassis Intrusion Switch 1 2 1 intrusion switch 2 intrusion switch cable Installing the Chassis Intrusion Switch 1 Connect the intrusion-switch cable to its system board connector. See Figure 3-29. 2 Insert the switch into the opening in the chassis wall and gently, but firmly, press in the switch until it is fully seated. See Figure 3-29. 3 Close the system. See "Closing the System" on page 66. 4 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing System Components 121
Installing System Components
121
Figure 3-29.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Connect the intrusion-switch cable to its system board connector. See
Figure 3-29.
2
Insert the switch into the opening in the chassis wall and gently, but firmly,
press in the switch until it is fully seated. See Figure 3-29.
3
Close the system. See "Closing the System" on page 66.
4
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
intrusion switch
2
intrusion switch cable
1
2