Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 69
Cooling Shroud Assembly, Removing the Cooling Shroud Assembly
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Cooling Shroud Assembly Removing the Cooling Shroud Assembly NOTICE: Do not operate the system without the cooling shroud assembly. The cooling shroud assembly must be installed to direct the airflow from the fans. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 65. 3 Remove the processor expansion module (PEM). See "Removing the PEM or PEM Shell" on page 73. 4 Remove the cooling shroud assembly by lifting the shroud by the corners. See Figure 3-5. Installing System Components 69
Installing System Components
69
Cooling Shroud Assembly
Removing the Cooling Shroud Assembly
NOTICE:
Do not operate the system without the cooling shroud assembly. The
cooling shroud assembly must be installed to direct the airflow from the fans.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 65.
3
Remove the processor expansion module (PEM). See "Removing the PEM
or PEM Shell" on page 73.
4
Remove the cooling shroud assembly by lifting the shroud by the corners.
See Figure 3-5.