Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 85
Internal USB Memory Key (Optional), Installing the Optional Internal USB Memory Key
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Internal USB Memory Key (Optional) Your system provides an internal USB connector located on the system board for use with an optional USB flash memory key (see Figure 6-1). The USB memory key can be used as a boot device, security key, or mass storage device. To use the internal USB connector, the Internal USB Port option must be enabled in the Integrated Devices screen of the System Setup program. To boot from the USB memory key, you must configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in the System Setup program. See "Using the System Setup Program" on page 43. For information on creating a bootable file on the USB memory key, see the user documentation that accompanied the USB memory key. Installing the Optional Internal USB Memory Key CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet. 2 Open the system. See "Opening the System" on page 65. 3 Locate the USB connector on the system board (see Figure 6-1). 4 Insert the USB memory key into the USB connector onto the board. See Figure 3-15. Installing System Components 85