Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 51

Serial Communication Screen Table 2-6 lists the options and descriptions for the information fields that appear on the Serial Communication screen. Table 2-6. Serial Communication Screen Options Option Description Serial Communication (On without Console Redirection default) Options are On without Console Redirection, On with Console Redirection via COM1, On with Console Redirection via COM2, and Off. External Serial Connector Specifies whether COM1, COM2, or Remote Access (COM1 default) Device has access to the external serial connector for serial communications. Failsafe Baud Rate (115200 default) Displays the failsafe baud rate used for console redirection when the baud rate cannot be negotiated automatically with the remote terminal. This rate should not be adjusted. Remote Terminal Type Select either VT 100/VT 220 or ANSI. (VT 100/VT 220 default) Redirection After Boot (Enabled default) Enables or disables BIOS console redirection after your system boots to the operating system. System Security Screen Table 2-7 lists the options and descriptions for the information fields that appear on the System Security screen. Table 2-7. System Security Screen Options Option System Password Description Displays the current status of your system's password security feature and allows you to assign and verify a new system password. NOTE: See "Using the System Password" on page 55 for instructions on assigning a system password and using or changing an existing system password. Using the System Setup Program 51