Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 38
Actual Link Width, PCIe Fatal Error
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table 1-8. System Messages (continued) Message Causes Corrective Actions PCIe Degraded Link Faulty or improperly Reseat the PCIe card in the Width Error: installed PCIe card in the specified slot number. See Embedded specified slot. "Installing an Expansion Bus#nn/Dev#nn/Func Card" on page 78. If the n problem persists, see Expected Link Width is n "Getting Help" on page 179. Actual Link Width is n PCIe Fatal Error Faulty or improperly Reseat the PCIe card in the caused a system installed PCIe card in the specified slot number. See reset: Slot n specified slot. "Installing an Expansion or Embedded Bus#nn/Dev#nn/Func Card" on page 78. If the problem persists, see "Getting Help" on page 179. n Please check the system event log for details. PCI BIOS failed to install PCI device BIOS (Option Reseat the expansion cards ROM) checksum failure and expansion card cables. is detected during If the problem persists, see shadowing. A cable to an "Troubleshooting expansion card is Expansion Cards" on unseated; an expansion page 164. card is faulty or improperly installed. Plug & Play Configuration Error Error encountered in initializing PCI device; faulty system board. Install the NVRAM_CLR jumper and reboot the system. See Figure 6-1 for jumper locations. If the problem persists, see "Troubleshooting Expansion Cards" on page 164. 38 About Your System